Where Is The TPMS Reset Button? Everything You Need To Know

Proper tire pressure in all the tires is a must to ensure safety on the road. Tire Pressure Monitoring System (TPMS) is an essential feature in all modern vehicles. The purpose of this system is to monitor the pressure in all four tires at all times. 

In case there is a problem with the tire pressure, the system will send alerts and signals to the owner. This will help to identify the problem and fix it properly. However, to ensure the best performance and safety, owners have to reset the system at times. 

So, where is the TPMS reset button located? Well, we will know that in this guide! We will also discuss a few key pieces of information about the topic. Read on to learn more. 

Where Is The TPMS Reset Button

What Is A TPMS Reset Button?

As we mentioned above, the Tire Pressure Monitoring System is equipped in several modern vehicles. The TPMS reset button is a feature found in automobiles that come with a Tire Pressure Monitoring System (TPMS). This safety feature monitors the air pressure in tires and alerts when the pressure is too low or too high.

The TPMS reset button is used to reset the system after changing or rotating tires and replacing the TPMS sensors. Resetting is also required after performing any maintenance task that will cause an impact on the TPMS. This ensures that the system is set up correctly and does not send any false signal in tire pressure.

Where Is The TPMS Reset Button Located?

The position of the TPMS reset button varies depending on the make and model of the car. Most of the cars have TPMS button in the glove compartment, center console, and under the steering wheel.

1. Glove compartment

Glove compartment
Glove compartment

In a few vehicles, the TPMS reset button is inside the glove compartment. Check the owner’s manual for the location or look for a small button or switch inside the compartment

2. Center console

The TPMS reset button is often found inside the center console of the car. Look for a switch or button that can be accessed easily. 

3. Under Steering Wheel

The TPMS reset button is commonly located under the steering wheel of the vehicle. You can also check the dashboard on the side of the driver for the button

When To Use The TPMS Reset Button?

In certain situations, using the TPMS reset button is important to ensure proper system performance. This will help to make sure that the system is sending correct signals at all times to prevent damage or reduce the risk of accidents. Here are the situations when you need to use the TPMS reset button. 

After Rotating Tires

When you rotate the tires, they move from one position to another. This changes the position of each tire connected to the TPMS sensors. And this repositioning often causes the system to display an incorrect reading. 

To correct this, it is essential to use the TPMS reset button to recalibrate the system to the new tire positions. By doing so, the TPMS system will accurately monitor the air pressure in each tire and send alerts about the pressure. 

After Replacing Tires

Damaged or old tires often require replacement. The new tires sometimes have different specifications than the original tires. These include different load capacities, speed ratings, etc. This can affect the accuracy of the TPMS system, as the sensors may not be calibrated to the new tire specifications. 

Making sure that the TPMS system is accurately monitoring the air pressure in each tire is necessary. And for this, owners must use the TPMS reset button to reset the system to the new tire specifications. This will help the system to identify each tire properly and send accurate alerts. 

After Performing Maintenance

The TPMS system requires maintenance on a regular basis to uphold its performance. Replacing the battery, installing or cleaning the sensors, and so on are common tasks. After completing the maintenance, using the TPMS reset button is important to set up the system properly. 

This is because performing maintenance on the TPMS can cause the system to malfunction or display inaccurate readings. And resetting the system can help ensure that it is functioning correctly. 

How To Use The TPMS Reset Button?

Using the TPMS reset button is quite easy and only takes a few minutes. However, following the steps properly is necessary to prevent problems and recalibrate the system properly. Take a look at the steps on how to use the TPMS reset button. 

Check The Owner’s Manual

Before resetting the TPMS system, it is important to read the owner’s manual of the vehicle. The manual will provide you with all the specific instructions for the make and model of your vehicle.

Make Sure All Tires Are Properly Inflated

Before you reset the system, make sure that all the tires are properly inflated. If the tires are not inflated up to recommended pressure levels, make proper adjustments. 

Locate The TPMS Reset Button

Locate The TPMS Reset Button
Locate The TPMS Reset Button

Refer to the owner’s manual of the car to find the TPMS reset button. You can also check the dashboard, steering wheel area, glove compartment, and so on to locate the button. 

Turn On The Ignition

After locating the reset button, turn on the ignition of the vehicle. However, make sure that you do not turn on the engine of the car. 

Press And Hold The TPMS Reset Button

Once the ignition is on, press and hold the TPMS reset button. Continue to hold the button until the TPMS light on the dashboard blinks two or three times. The time required for the light to come on and blink varies significantly. Therefore, it is important to keep your patience. Release the button you are holding once the light blinks. 

Wait For The TPMS Light To Turn Off

The TPMS light on the dashboard should turn off within a few seconds of releasing the reset button. If the light continues to blink for several seconds after releasing, repeat the process or check the owner’s manual for further instructions. Lastly, turn off the ignition after the TPMS light turns off.

FAQs

Got questions and queries about the topic? Read these answers to clear the puzzle! 

How Often Should I Use The TPMS Reset Button?

There is no fixed time for using the TPMS reset button. However, we typically recommend resetting the system after rotating or replacing tires, performing maintenance on the TPMS system, and so on. 

Are TPMS Sensors Compatible With All Types Of Tires?

TPMS sensors are compatible with most types of tires. However, a few high-performance tires may require a special TPMS sensor (our pick) to be installed. 

Conclusion 

The location of the TPMS reset button varies due to the making, and brand of the car. Mostly, it is located in the glove compartment, center console, and under the steering wheel. Make sure to focus on the owner’s manual or look for the button and reset the system with the help of this guide. 

TPMS is an essential safety feature in vehicles that helps by perfectly monitoring the tire conditions. However, due to maintenance, replacement, rotation, etc., the system often has to be calibrated. And for that, resetting the TPMS system is a must. 

Similar Posts