Where Is The Honda Accord Jack Points Located?

Whether you have a flat tire or need to go under your car, you need to lift it using the jack points for repairs. At that point, you might want to know the jack point locations of your Honda Accord to proceed as a beginner.

All model years of the Honda accord come with a total of six jack points. However, the locations of these jack points vary with different generations and the production year due to changes in the framework’s design.

As a Honda Accord owner, it is imperative you know the precise locations of the jack points to perform small repairs themselves. To learn all about the Honda Accord jack point positions, you might want to go through this article to the end.

Where Is The Honda Accord Jack Points Located?

Knowing about the locations of your car’s jack points is essential as an owner or regular user. Unfortunate events might happen suddenly while driving on a freeway. Hence, you may need to lift your vehicle for diagnosis and further repairs.

Hence, jacking up your vehicle is quite hazardous if the jack is not properly aligned with the jack points. 

First-Third Generation Honda Accord Jack Point Locations (1976-1989)

Honda Accord began its journey as a commercial sedan in 1976. From then, this specific model of Honda never had to look back for its versatility. 

The first to third-generation Accords possessed a similar chassis and body design. As a result, the positions of the jack points of these model years of Honda Accord are quite identical.

There have been six jack points on every Honda Accord since 1976. Four are located on each side of the vehicle, and each is on the front and rear frames of the car.

You will find the front-end jack point directly under the hood. At the same time, the rear jack point is slightly inside towards the car’s rear axle.

Both front and rear jack points are curved and shaped like a hook. You will get to the side jack points below the side rails of the car. It is shaped as a metallic block near the end of the front and rear wheels towards the cabin doors.

These side jack points are usually used to support the car’s entire weight. That is why you must put suitable jack stands underneath the side jack points.

Fourth-Sixth Generation Honda Accord Jack Point Locations (1990-2002)

The body and chassis length of these Honda Accord generations gradually elongated. As a result, the positions of the jack points shifted a little. The rear jack point, shaped like a round hook, was installed right under the rear bumper and below the license plate.

It would help if you moved slightly inside the hood toward the engine’s center for the front-end jack points. You will notice a solid metallic bit instead of a hook. That metallic block is the front jack point of your Honda Accord.

The side jack points are placed near the front and rear wheels under the cabin. Approaching the door hinge would give you quick access to the side points.

Seventh and Eighth Generation Honda Accord Jack Point Locations (2003-2012)

The front and rear jack points are shifted further inside the chassis in the seventh and eighth generations of the Honda Accords. This makes it harder to push inside a high-profile jack to lift the car from the rear or front. 

You would require a low-profile specialized jack for lifting without causing any damage to the body. Coming to the side, jack points, which are also known as pinch welds, are located adjacent to the ending of the front and rear wheels of each side.

If your Accord has a side skirt, you might need to go further inside to get your hands on the pinch welds. These are solid metallic blocks to support the heavy weight of the vehicle.

Ninth and Tenth Generation Honda Accord Jack Point Locations (20013-Present)

The modern and further upgraded Honda Accords are much lower than the conventional Accords. Their ground clearance height is very low due to bulky body kits. The front lip makes it very hard to reach or even look at the jack point peeking underneath the car.

That is why to get access to the front jack point, you need to have an elongated, long reach and a low-profile jack. The front jack point is located further inside the normal destination and middle of the hood on the center of the front axle. 

You will experience that the jack point is shaped as an oval metallic loop. The shape helps lock on the incoming jack lever to get firmly connected. Since the jack point is way more inside, it becomes difficult to reach using a conventional floor jack.

Similarly, the side jack points or pinch welds are hidden by the side rails, skirts, or body kit. For an easy approach, you can place your palm underneath the cabin where the door opens and slide it towards the wheels. 

A solid metallic pinch weld would be there, which is the jack point for lifting the car using jack stands.

Like previous generations, the rear lifting point is right underneath the license plate and rear bumper.

How To Conveniently Find Jack Points On A Honda Accord?

If you have a new model of Honda Accord and do not know the whereabouts of the jack points, then nothing to worry about as we have got you covered.

Firstly, it is easier to approach from the rear end. It is because, no matter how much lower your car is, the rear would always be lifted compared to the front end. Peek underneath the rear number and look for a black colored metallic pinch weld.

Mostly it is shaped as a hook, but in some generations, the rear jack point is a solid metal weld. Afterward, go to any side of the vehicle and the passenger or driver-side door hinge. Slide our hand in the opposite direction and look for a metal bar on the chassis.

There would be two side jack points on each side of the vehicle positioned directly parallel to the others. 

Now, you have to search for the front jack point manually. It is because, in the newer generations, the jack point is located at the center of the front axle further inside the engine.

How To Safely Jack Up Honda Accords Using The Jack Points?

First of all, park your vehicle on a plain and sturdy road. Put the vehicle on parking gear and activate the e-brake. It is highly recommended to use wheel chocks to avoid accidents. 

Before jacking up your Honda Accord, you must know all the jack points’ exact positions. You can put a mark on those if required. Afterward, select the best-suited floor jack for your car and four jack stands to support the weight.

Honda Accords manufactured before the ninth generation can be easily jacked using conventional stock floor jacks. It is due to a high ground clearance of the body kit.

Start by lifting the car’s rear end by simply placing the jack head to the jack point and locking it firmly. After that, place four jack stands on each side jack point to keep the car in the air. 

The starting lifting point selection depends upon the purpose. If you want to replace a flat tire or work on brakes, you can directly lift the car from the side rail. 

To work on the engine, catalytic converter, or different sensors, it’s advised to lift the car from the front or rear.

What Are Some Common Reasons for a Gas Pedal to Stop Working While Driving?

The common reasons for gas pedal failure while driving vary. Electrical issues like blown fuses or faulty sensors can cause the gas pedal to stop working. Mechanical problems could include stuck cables or broken accelerator springs. It is important to address these issues promptly to ensure the safe operation of your vehicle.

FAQs

For beginners, jacking up a car could be dangerous and difficult. You can use the following questionnaires to learn more about the jack points of the Honda Accord.

Conclusion

Attempting to lift your Honda Accord without prior knowledge of the jack points and their location can be critical. You might end up damaging and causing dents on the body kit, placing the jack in the wrong place. Besides, it can also hurt you badly if the attempt fails.

Jack points are the hard points made of solid metal bars of the chassis, which can support the entire weight of a car. Hence, ensure the locations of the jack points in your Honda Accord and get the compatible jack for safe lifting.

We sincerely hope that this article has been beneficial in figuring out the locations of jack points on any Honda Accord.